The EGT and CHT wires were installed and routed today.
The cylinder head probes are attached via a threaded insert into the cylinder. Left is the cylinder's accommodation for the insert. Right is the insert, inserted.
Right side sensor routing.
Left side sensor routing.
Here are the various wires leading to the right CHT and EGT probes fastened down.
Here are the various wires leading to the left CHT and EGT probes fastened down.
To test if I wired things correctly, I carefully applied the heat gun adjacent to the sensors. The sensors not only worked, but indicated the correct cylinders as the heat was applied.
No comments:
Post a Comment