14 October 2017

Finishing: Canopy. Canopy clips in.

The canopy clips are finally in.  Here they are prior to installation.


It's very important that they be test fit with the canopy off.  And that the flox added on page 38-36 be properly formed so as not to interfere with the canopy clips' fitment.


Also, do not excessively deflect the F-01449A Cover Clip.  It takes very little deflection to deform it to an unusable state.  I destroyed two clips before I got it right.  See the inset below from Figure 3, page 38-36.

 
Canopy clips in place.  I should have pushed the left one further forward.  But the gasket sealant will keep the moisture out.


No comments:

Post a Comment