15 February 2017

FWF: Cowl Baffle. Cowl baffle seals placed.

This was an easy task.  Nothing exciting to report here.  Just placement and riveting.  I have not yet applied RTV to seal gaps or to secure the magneto blast tubes.  I'm waiting to finish all work on the cowl halves.



2 comments:

  1. Have you seen Tim Olsens posts on VAF about chaffing on the inside of the cowls, might want to review and do some filing now before?

    ReplyDelete
  2. Hi there. Thanks for the great comment. You are referencing the thread below. I will be watching carefully to determine if that applies to my build too. Thanks!

    http://www.vansairforce.com/community/showthread.php?s=090880c813bdcbbc76b594b35d9e0a00&t=147044

    ReplyDelete