Finish: Cowling. Oil door complete.

I needed to add a large spacer to the COWL-00005A Oil Door Hinge so that the COWL-00004 Oil Door would sit at the correct level against the cowl.

I didn't like the gap around the oil door on the cowl.  So my friend went to work to reduce that gap.

First, the gap is filled with flox.

Then it's slowly filed away to get a tighter fit.  The astute will also notice I used flush quarter-turn fasteners for the oil door, similar to my upper cowl.  These little fasteners are from SkyBolt.